USB Device not Recognized

Today we will offer 7 fastest solutions to USB Device Malfunctioned and not Recognized error in Windows when you are trying to connect the USB device.

When you are trying to connect the USB device with the computer and willing to find some important documents you stored on the USB device, suddenly the Windows informs an error message: USB device not recognized. It means the last USB device malfunctioned and Windows does not recognize it.

We found that many users had such errors on Windows 7/8/10 when they tried to connect the USB device with the computer. USB does not show up on or not recognized means you cannot access the USB device at this moment.

Although this problem is quite the head-scratcher, it doesn’t mean we cannot fix it. The following are 7 fastest solutions that any Windows user can give a shot and try to get rid of the USB device malfunctioned and not recognized problems.

7 Fastest Solutions to Fix USB Device Malfunctioned and not Recognized Error

Solution 1. Remove and then plug the power supply to fix the USB device malfunctioned error.

Unplug the USB device from the Computer >> Turn off the computer >> Remove the power supply of the computer >> Plug the power supply back to the computer after 20-30 seconds >> Restart the computer >> Plug on the USB device again

Solution 2. Unplug the USB device and reconnect with a computer

Unplug the USB device from the computer >> clean the USB port of the device clamp the position of the USB port and flash chip inside the USB housing >> Reconnect the USB device with a computer

Solution 3. Configure the USB Root Hub 

Press WIN+X and then choose Device Manager >> Find the Universal Serial Bus controllers >> Right-click on USB Root Hub >> Properties >> Power Management >> Check to Allow this computer to turn off this device to save power >> Click Ok >> Plug the USB device again with the computer.

Solution 4. Disable and then enable the Generic USB hub

Press WIN+X and then choose Device Manager >> Find the Universal Serial Bus controllers >> Right-click on Generic USB hub >> Disable >> After that then click Enable >> Click Ok >> Plug the USB device again with the computer.

Solution 5. Update the USB device driver to fix the last USB device malfunctioned error

Press WIN+X and then choose Device Manager >> Find the Universal Serial Bus controllers >> Right-click on the USB device’s driver >> Update Driver Software >> After update >> Click Ok >> Plug the USB device again with the computer.

Solution 6. Uninstall the universal serial Bus controller then reinstall

Press WIN+X and then choose Device Manager >> Find the Universal Serial Bus controllers >> Right-click on the USB device’s driver >> Uninstall >> Reboot the computer>> Plug the USB device again with the computer >> The system will reinstall the driver for you and then fix the last USB device malfunctioned error

Solution 7. Disable USB selective suspend

Press WIN+X and then choose Power Option >> Change Plan setting >> Change advanced power setting >> USB settings >> USB selective suspend setting >> Disable On battery and Plugged in >> Save the settings >> Plug the USB device again with the computer

How to recover data from the USB device that has USB device malfunctioned and not Recognized error

We’ve shown you the 7 fastest solutions to fix USB device malfunctioned error, each one has been proved that is the effective method to fix the error. However, if the solutions didn’t work to help you, you’d need the third-party free data recovery software to retrieve data for you on the USB device.

Here we recommend the Bitwar Data Recovery Software. It’s the best free data recovery tool that supports recovering all types of files stored on the USB device, hard drive, external hard drive, etc.

You can free get Bitwar Data Recovery and then install it on the computer, launch the software when it’s ready. Then follow the below steps to recover data on the USB device.

Let’s try it now!

Please refer here for more about USB data recovery.